How to erect your portable sheep fence:
-Fasten the reel post, with 3 reels attached, to a support post
-Attach the 3 wires/tapes to a multiwire standard/treadin and walk to the other end of the proposed fence, carrying enough treadins for the completed fence
-Clip the wires/tapes to the anchor point and walk back to the reels placing a standard approximately every 7m along the line
-Locate the locking ratchet on each reel and tighten the wires/tapes (don’t over tighten)
-Connect the green energizer lead to an earth stake
-Clip the triple lead connector to each wire and to the energizer red terminal
-Connect the battery and turn on
-Check the fence voltage using a digital volt meter
